GP-3000 resin

This orthophthalic-based resin is designed and produced with excellent mechanical and physical properties and very high hardness.
GP3000 resin is specially designed for manufacturing high-hardness molded parts that, after complete curing, have excellent mechanical properties and very good resistance to chemical agents. This resin can also be used to make parts containing high-hardness glass fibers.
This resin can be used to make parts that have minimal color.

Category:

Description

Usage

Composite

Fiberglass pools

Molding

Fiberglass

Part making

Physical properties of liquid resin
Properties Results
Color Colorless
Viscosity 550 – 450 cps
Percent solids 64 ± 2 %
Acid number 30 ± 2
Gel time 10 – 12 min
Time to reach final temperature 23 – 18 min
Final temperature 5 ± 150 °C
Appearance Transparent
Specific gravity (density) 1.10 – 1.06 gr/cm3
Storage period 6 months
  • All experiments were performed at 25°C.
  • Viscosity was measured at 25°C, 60 rpm, and spindle number 3.
  • To harden the resin, 0.1 grams of cobalt and methyl ketone peroxide type A60 are required in an amount of 1.5 grams of resin at a temperature of 25 degrees Celsius.
Mechanical properties of hardened resin
ST Property
50 ± 5 Tensile strength
2.2 – 2.4 Tensile modulus
2 – 4 Tensile elongation
100 – 120 Flexural strength
4.1 – 4.4 Flexural modulus
3 – 4.5 Volume shrinkage
69 ± 5 HDT*
40 ± 5 Barcol Hardness
  • Disclaimer: This information is continuously measured and is not considered part of the product's technical specifications. It is provided solely to better describe the product.
  • To perform the HDT test, a cured part must be left at room temperature for 24 hours and then placed at 105 degrees for 2 hours.
Packaging

Unsaturated polyester resin is packaged in unlined metal drums of 200 kg net weight.

Warehousing

Store the product in a cool place at a temperature below 25°C, away from moisture and direct sunlight. If the above conditions are met, the product’s shelf life is a maximum of 6 months from the time of production.

Safety and environmental protection

Common storage conditions should be observed when using unsaturated polyester resins. If needed, product safety information is available in the Safety Data Sheet.

Disclaimer

This sheet contains general recommendations about “Qatreh Isfahan” products and, due to the inherent differences in materials and environmental conditions, does not provide any guarantee of compatibility or conditions of use, and the company is disclaimed any legal liability. Users should always refer to the Ghatreh.co website for the latest and most valid information.

Reviews

There are no reviews yet.

Be the first to review “GP-3000 resin”

Your email address will not be published. Required fields are marked *